Stupidly , I fitted one of these self cutting tap kits years ago
https://www.screwfix.com/p/outside-tap-kit-15mm-x/33139
I fitted it onto the main cold pipe leading to the washing machine but I fitted it below the actual tap for that pipe . Now I have discovered that I cannot remove the self tapping tap as it will leave a hole in the pipe below where the washing machine screws into it.
It is an easy job to cut the pipe below the hole and refit the washing machine hose connector back onto the pipe ?
I hope that make sense .
I'm away to take a picture:-)
Results 1 to 10 of 10
Thread: Outside self cutting tap kit
-
28-06-2018 05:27 PM #1
Outside self cutting tap kit
Last edited by sleeping giant; 28-06-2018 at 05:32 PM.
No Eternal Reward Shall Forgive Us Now For Wasting The Dawn
-
-
28-06-2018 07:13 PM #3
- Join Date
- Mar 2010
- Posts
- 184
Yes should be easy ,shut the cold mains off,open a cold tap to make sure it's off.you probably won't have a 15mm pipe cutter so saw the pipe just before the hole ,file the end ,take the compression nut off the washing machine valve ,you will need a new 15 mm compression ring .fit it on the valve ,make sure it's pushed all the way home onto the pipe ,hold the valve with a pair off grips and tighten the nut with a spanner.
-
28-06-2018 07:25 PM #4This quote is hidden because you are ignoring this member. Show QuoteNo Eternal Reward Shall Forgive Us Now For Wasting The Dawn
-
28-06-2018 08:17 PM #5
- Join Date
- Mar 2010
- Posts
- 184
Might be a good idea ,once you've tightened the washing machine valve to take it off again to make sure you have compressed the ring ,if there is a slight leak from it put some plumbers thread tape round the ring .
-
29-06-2018 05:47 AM #6
- Join Date
- Nov 2010
- Posts
- 4,943
Chuck that diy kit in the bin and call a plumber.
The self tapping kit will only cause you problems down the line.
People are going mad for outside taps this week, I've done six this week.
-
29-06-2018 07:31 AM #7This quote is hidden because you are ignoring this member. Show Quote
How much does it cost to fit an outside tap roughly ?No Eternal Reward Shall Forgive Us Now For Wasting The Dawn
-
29-06-2018 07:31 AM #8This quote is hidden because you are ignoring this member. Show Quote
-
29-06-2018 07:34 AM #9This quote is hidden because you are ignoring this member. Show QuoteNo Eternal Reward Shall Forgive Us Now For Wasting The Dawn
-
29-06-2018 08:38 AM #10
- Join Date
- Nov 2010
- Posts
- 4,943
This quote is hidden because you are ignoring this member. Show Quote
Log in to remove the advert |
Bookmarks